The Motion Commander family of operator interface products is the quickest, easiest and most cost-effective motion control software available for developing a PC-based man-machine graphical operator interface. A 32-bit version is available for Windows 9x/ME/NT4/2K/XP, and 16-bit versions are available for Windows 3.1 and DOS.

Motion Commander On-line Documents:

Updates for Licensed Users of Motion Commander:

This update is for licensed users of 32-bit Motion Commander III only. Check your Motion Commander version in the "About" box to see if you need to update. This file (MC32UPGR.EXE, 751KB) is in self-extracting zip format. Click on the hyperlink to download the file, then double-click on it from Explorer to extract the Motion Commander update files. Specify your existing Motion Commander III directory, usually "C:\MC32".

This complete Motion Commander installation archive is for licensed users of 32-bit Motion Commander III only.  This file (MC32DISK.EXE, 1272KB) is in self-extracting zip format and is password-protected. E-mail Greene & Morehead Engineering to request the password. Click on the hyperlink to download the file, then double-click on it from Explorer to extract the files to create a complete Motion Commander installation diskette.

This update is for licensed users of 16-bit Motion Commander II for Windows only. Check your Motion Commander version in the "About" box to see if you need to update. This file (MC2WUPGR.EXE, 560KB) is in self-extracting zip format. Click on the hyperlink to download the file, then double-click on it from File Manager to extract the Motion Commander update files. Specify your existing Motion Commander II directory, usually "C:\MC2".

This update is for licensed users of 16-bit Motion Commander II for DOS only. Check your Motion Commander version along the bottom of the startup screen to see if you need to update. This file (MC2DUPGR.ZIP, 560KB) is a zip file. You will need to un-zip it using PKUNZIP.EXE or the equivalent.

Evaluation Versions of Motion Commander:

Important Notice: These Demo versions of Motion Commander will shut down communication with PMAC after a timeout period. They are for evaluation purposes only and are not intended to be used for an actual operator interface application.

This is an evaluation version of 32-bit Motion Commander III. This file (MC32DEMO.EXE, 714KB) is in self-extracting zip format. Click on the hyperlink to download the file, then double-click on it from Explorer to extract the Motion Commander demo files. You will probably want to create a desktop shortcut to "MC32.EXE" for convenience.

This is an evaluation version of 16-bit Motion Commander II for Windows. This file (MC2WDEMO.EXE, 530KB) is in self-extracting zip format. Click on the hyperlink to download the file, then double-click on it from File Manager to extract the Motion Commander demo files. You will probably want to create a shortcut to "MC2_WIN.EXE" for convenience.

This is an evaluation version of 16-bit Motion Commander II for DOS. This file (MC2DDEMO.ZIP, 500KB) is a zip file. You will need to un-zip it using PKUNZIP.EXE or the equivalent.

This file (STARTMC3.EXE, 730KB) is a "Getting Started" document in Microsoft Word 97 format. It is in self-extracting zip format. Click on the hyperlink to download the file, then double-click on it from Explorer to extract the Word document. This document is specific to 32-bit Motion Commander III, but the majority of the chapter describes how to design instrument panels using any version of Motion Commander.

Return to the Greene & Morehead Engineering Home Page

If you have any questions or suggestions, please send us an e-mail at: support@MotionCommander.com

© Copyright 1998-2003 Greene & Morehead Engineering, Inc. All rights reserved.

PMAC is a registered trademark of Delta Tau Data Systems